What is needed to fly NT116S with NT206L

When suspending an NT116S, the NT116S flybar may be used (and is required to fly more than one
cabinet). To rig NT206L underneath an NT116S array, a transition bar is necessary (the NT206L flybar will not work in this case).

NOTE: It is important to understand that NT116S does NOT ship with rigging. In order to suspend subwoofer arrays (more than one cabinet, or to rig with other products) an additional rigging kit is needed.

The NT116S flybar allows for suspending up to twelve subwoofers at a 10:1 safety factor (it
is recommended to refer to Resolution software to determine safe deployment of any EAW
system). The frame connects to all four rigging points of NT116S after the rigging kit has been
installed on the cabinet. For detailed instructions on flybar installation, please refer to the
NT116S User Manual.

The Transition Bar allows for the rear rigging of NT206L to integrate with NT116S in a flown array. The front rigging of NT206L will connect directly to the front rigging of NT116S.