Skip to content
English
Contact us
  • There are no suggestions because the search field is empty.

Activating Offline Radius Arrays

Creating offline arrays comprised of different modules doesn't activate once modules

steps:

  1. Create an array of an RSX208L and RSX12 offline
  2. Connect to a Radius system that matches the offline config
  3. tap and drag the detected Radius modules over the top of the offline array
  4. No response occurs

It does work fine with arrays containing the same product, or the point source speakers, but not when combining line array products.

This was a know issue in earlier versions of Mosaic. This has been addressed and corrected as of v. 1.0.26