Linking power with NT206L

The Neutrik® powerCON® AC mains power in and power out connectors are wired 
in parallel to provide an AC mains inlet and outlet on each NT206L product. The 
AC mains inlet mates with a Neutrik® powerCON® True1 connector. To loop the AC 
mains from enclosure to enclosure, connect an AC mains jumper cable.

Up to two additional NT206L products can be looped in this fashion. Use an AC loop 
connector to daisy-chain AC mains power from one enclosure to another. The maximum, 
continuous load must not exceed 16A for both the 115V version and the 230V version.