When configuring an Anya system to use a single Anya module as an on-ramp (receive source from Analog or AES supplied to the module) not all modules receive correct Dante assignment.

With the assigned array, click the green bar to edit the input:

• Select mode as Analog or AES
• Check ‘on-ramp’
• Source as Anya module
• Select OK

Using Dante Controller, verify and correct the configuration:

• Open Dante Controller
• Select the plus sign at the corresponding intersection between each Anya module in the array and the source Anya module
• Verify that a green checkmark exists at the intersection of appropriate channels.
• Where the green checkmark does not exist, select the intersection to create the Dante channel assignment