LF/MF Driver on RSX208L appear to be reversed on Driver Test

Upon running driver test on RSX208L line array, different results occur per module.

The LF on one module appears to be different on another (alternating between Left and Right)

This is most likely related to wiring inside the cabinet being reversed. Switching the two spade connections on the terminals should correct this issue.

NOTE: Please make sure that + and - is paid close attention to when reconnecting. Though this is fairly obvious on the driver test, source playback will be lightly effected to the point where no difference may be detected by ear. Polar data is very close in relation to these two drivers.