1. Knowledge Base
  2. UX Processors & Amplifiers

Persistent rebooting on a UX8800

UX8800 persistantly reboots without proverbcation.

Usually, persistent rebooting on a UX8800 is related to corrosion in the ribbon cable that goes between the power supply and the main board.

This is only seen on older processors, since newer ones have the wires soldered permanently instead of using connectors.

If this is an older processor with connectors on the boards, the best thing to do is to remove that cable and solder new wires directly between the PSU and the main board.

Attached below is a document to illustrate.