When configuring an Anya system to use a single Anya module as an on-ramp (receive source from Analog or AES supplied to the module) not all modules receive correct Dante assignment.

With the assigned array, click the green bar to edit the input:

  • Select mode as Analog or AES
  • Check ‘on-ramp’
  • Source as Anya module
  • Select OK

Using Dante Controller, verify and correct the configuration:

  • Open Dante Controller
  • Select the plus sign at the corresponding intersection between each Anya module in the array and the source Anya module
  • Verify that a green checkmark exists at the intersection of appropriate channels.
  • Where the green checkmark does not exist, select the intersection to create the Dante channel assignment