General Support

• Is it possible to remove the protection fabric on-site to access the horn on a WP Speaker to rotate it?
• WHY SHOULD I CARE ABOUT CLIPPING?
• HOW MUCH AMPLIFIER POWER DO I NEED?
• Paint used for RSX Array and Loudspeaker products
• Customer asks how to connect or is having trouble connecting to connect to UX8800
• Where can I find software installers for EAW Products?
• Is the Max SPL rating on the website peak or continuous?
• Where can processor/tabular settings be found for EAW Speakers
• EAW Focusing
• Documentation for SL52
• Calculating Q for each speaker at various frequencies
• Amplifier Size
• Repaint Instructions
• Has EAW changed how SPL values are measured?
• Amp Voltage + 6dB of headroom for speaker
• Calculating end fire subwoofer delay time configuration
• Are EAW accelerated life tests RMS or Peak?
• Advantages of Bi Amped Speakers
• Automatic Air loss Compensation
• Axial SPL Calculation
• Calculating Amp Gain from Input Sensitivity
• Directivity Index and Directivity Factor
• EAW Focusing
• Electric Power Equations
• Ethercon Connectors
• Listening by Convolution
• LoudSpeaker Bracket Material
• What do some of the model number variances mean?
• Parallel Load References
• Power Rating Conversion Formulas
• Shock Hazard Curves
• Sound Intensity
• Sound Power
• Sound Pressure
• Spherical Loudspeaker Data
• Subwoofer Coupling Breakdown
• The Impulse Response
• Translate Watts into Decibels
• Understanding a Speaker Sensitivity Rating
• Understanding Amplifier Power Ratings
• What type of paint would be needed to touch up chips or worn areas on the WP Cabinets?
• Roughly calculate delay for system design
• Recommended Vertical Orientation
• Recommended Splay Angles
• What is the IP Rating on EAW WP cabinets?
• Green U-Net lights will spontaneously go off.
• What does the "GF" AND "NGF" mean on the Greybox file names?
• FIR Filter